|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
MOTOROLA SEMICONDUCTOR TECHNICAL DATA Order this document by BFS17LT1/D The RF Line NPN Silicon High-Frequency Transistor Designed primarily for use in high-gain, low-noise amplifier, oscillator and mixer applications. Packaged for thick or thin film circuits using surface mount components. * T1 suffix indicates tape and reel packaging of 3,000 units per reel. MAXIMUM RATINGS Rating Collector-Emitter Voltage Collector-Base Voltage Maximum Junction Temperature Symbol VCEO VCBO TJmax Value 15 25 150 Unit Vdc Vdc C BFS17LT1 RF TRANSISTOR NPN SILICON THERMAL CHARACTERISTICS Characteristic Total Device Dissipation, TA = 25C Derate above 25C (1) Storage Temperature Thermal Resistance Junction to Ambient (1) Symbol PD Tstg RJA Max 350 2.8 - 55 to +150 357 Unit mW mW/C C C/W CASE 318-08, STYLE 6 SOT-23 LOW PROFILE (TO-236AA/AB) DEVICE MARKING BFS17LT1 = E1 ELECTRICAL CHARACTERISTICS (TA = 25C unless otherwise noted.) Characteristic Symbol Min Typ Max Unit OFF CHARACTERISTICS Collector-Emitter Breakdown Voltage (IC = 10 mA) Collector-Base Breakdown Voltage (IC = 100 A) Collector Cutoff Current (VCE = 10 V) Collector Cutoff Current (VCB = 10 V) Emitter Cutoff Current (VEB = 4 V) V(BR)CEO V(BR)CBO ICEO ICBO IEBO 15 25 -- -- -- -- -- -- -- -- -- -- 25 25 100 Vdc Vdc nA nA A ON CHARACTERISTICS DC Current Gain (IC = 2 mA, VCE = 1 V) (IC = 25 mA, VCE = 1 V) Collector-Emitter Saturation Voltage (IC = 10 mA, IB = 1 mA) Base-Emitter Saturation Voltage (IC = 10 mA, IB = 1 mA) hFE 20 20 VCE(sat) VBE(sat) -- -- -- -- -- -- 150 -- 0.4 1 V V -- SMALL-SIGNAL CHARACTERISTICS Current-Gain -- Bandwidth Product (IC = 2 mA, VCE = 5 V, f = 500 MHz) (IC = 25 mA, VCE = 5 V, f = 500 MHz) Output Capacitance (VCB = 10 V, f = 1 MHz) Noise Figure (IC = 2 mA, VCE = 5 V, RS = 50 , f = 30 MHz) NOTE: 1. Package mounted on 99.5% alumina 10 x 8 x 0.6 mm. REV 7 fT -- -- CCB NF -- -- 1 1.3 1 5 -- -- -- -- GHz pF dB (c)MOTOROLA RF DEVICE DATA Motorola, Inc. 1995 BFS17LT1 1 PACKAGE DIMENSIONS A L 3 NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. 3. MAXIUMUM LEAD THICKNESS INCLUDES LEAD FINISH THICKNESS. MINIMUM LEAD THICKNESS IS THE MINIMUM THICKNESS OF BASE MATERIAL. BS 1 2 V G C D H K J DIM A B C D G H J K L S V INCHES MIN MAX 0.1102 0.1197 0.0472 0.0551 0.0350 0.0440 0.0150 0.0200 0.0701 0.0807 0.0005 0.0040 0.0034 0.0070 0.0140 0.0285 0.0350 0.0401 0.0830 0.1039 0.0177 0.0236 MILLIMETERS MIN MAX 2.80 3.04 1.20 1.40 0.89 1.11 0.37 0.50 1.78 2.04 0.013 0.100 0.085 0.177 0.35 0.69 0.89 1.02 2.10 2.64 0.45 0.60 STYLE 6: PIN 1. BASE 2. EMITTER 3. COLLECTOR CASE 318-08 ISSUE AE Motorola reserves the right to make changes without further notice to any products herein. Motorola makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does Motorola assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation consequential or incidental damages. "Typical" parameters can and do vary in different applications. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. Motorola does not convey any license under its patent rights nor the rights of others. Motorola products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the Motorola product could create a situation where personal injury or death may occur. Should Buyer purchase or use Motorola products for any such unintended or unauthorized application, Buyer shall indemnify and hold Motorola and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that Motorola was negligent regarding the design or manufacture of the part. Motorola and are registered trademarks of Motorola, Inc. Motorola, Inc. is an Equal Opportunity/Affirmative Action Employer. How to reach us: USA / EUROPE: Motorola Literature Distribution; P.O. Box 20912; Phoenix, Arizona 85036. 1-800-441-2447 MFAX: RMFAX0@email.sps.mot.com - TOUCHTONE (602) 244-6609 INTERNET: http://Design-NET.com JAPAN: Nippon Motorola Ltd.; Tatsumi-SPD-JLDC, Toshikatsu Otsuki, 6F Seibu-Butsuryu-Center, 3-14-2 Tatsumi Koto-Ku, Tokyo 135, Japan. 03-3521-8315 HONG KONG: Motorola Semiconductors H.K. Ltd.; 8B Tai Ping Industrial Park, 51 Ting Kok Road, Tai Po, N.T., Hong Kong. 852-26629298 BFS17LT1 2 *BFS17LT1/D* BFS17LT1/D MOTOROLA RF DEVICE DATA |
Price & Availability of BFS17LT1 |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |